It is a single-component, yellowish, additive to reduce pot-life, dry time and service times for Tecnofloor STF-7020, resin binder. The average to mix is maximum 150 g/ 7 kg kit of Tecnofloor STF-7020.
Main use:
NOTE: in case of doubts, call our technical department
| maximum consumption | 150 g / 7 kg Tecnofloor STF-7020 |
| density | 1.10 g/cm³ |
| viscosity | 3,000 cps |
| color | yellowish |
| Tecnofloor STF-7020 pot-life | ±25 min. |
| Tecnofloor STF-7020 dry time | ±3 hours |
| Tecnofloor STF-7020 pedestrian tack-free time | 4-5 hours |
| Tecnofloor STF-7020 vehicle tack-free time | ±20 hours |
The performance for this product is 150 g/ 7 kg Tecnofloor STF-7020 (maximum quantity)
Metal tins :450 g
12-months shelf life is stored in original containers in a dry environment at a temperature between 5-35 ºC (41-95°F). Keep away from direct sunlight, extreme heat, cold or moisture. Once the tin has been opened, the product must be used.
Respiratory Protection: When handling or spraying use an air-purifying respirator. Skin protection: Use rubber gloves, remove immediately after contamination. Wear clean body-covering. Wash thoroughly with soap and water after work and before eating, drinking, or smoking. Eye / Face: Wear safety goggles to prevent splashing and exposure to particles in the air. Waste: Waste generation should be avoided or minimized. Incinerate under controlled conditions in accordance with local laws and national regulations. Re-occupancy of the work site without respiratory equipment is minimum 24 hours providing the correct ventilation for the area sprayed. Contractors and applicators must comply with all applicable and appropriate guidelines for storage and safety guidelines.These safety recommendations for handling, are necessary for the implementation process as well as in the pre and post, on exposure to the loading machinery. Dispose waste in accordance with star or/and local regulations.
