.jpg)
Thinner and dluent for Desmopol polyurethane membrane and Tecnotop aliphatic resin topcoat. The dilution is only recommended by spray application ("airless equipment"). Also could be used for tools and equipment cleaning.
For application in the following situations:
NOTE: call our technical department about the application to other substrates or scopes of use
| density | 0.870 ±0.05 g/cm3 |
| color | transparent liquid absent of suspended matter |
Metal tins of 25l.
12 months at temperatures between 5 and 35° C (41 to 95 ºF), provided it is stored in a dry place.
Respiratory Protection: When handling or spraying use an air-purifying respirator. Skin protection: Use rubber gloves, remove immediately after contamination. Wear clean body-covering. Wash thoroughly with soap and water after work and before eating, drinking, or smoking. Eye / Face: Wear safety goggles to prevent splashing and exposure to particles in the air. Waste: Waste generation should be avoided or minimized. Incinerate under controlled conditions in accordance with local laws and national regulations. Re-occupancy of the work site without respiratory equipment is minimum 24 hours providing the correct ventilation for the area sprayed. Contractors and applicators must comply with all applicable and appropriate guidelines for storage and safety guidelines.These safety recommendations for handling, are necessary for the implementation process as well as in the pre and post, on exposure to the loading machinery. Dispose waste in accordance with star or/and local regulations.
| PROPERTIES | VALUES |
| color | transparent liquid absent of suspended matter |
| moisture content | 0.100% |
| density ISO 1675 | 0.70 ±0.05 g/cm3 |
| flashpoint | 25°C (77ºF) |
| VOC (supplied) | 860 - 880 g/l |
| recommended consumption | ±5% on DESMOPOL and TECNOTOP |
Results were performed in the laboratory at 20ºC and 50% RH, under controllable conditions. These values may vary depending on the application, climatology, or substrate conditions.
