Cleaning solvent for polyurea spray equipment (Tecnocoat) and spray or injection polyurethane foam (Tecnofoam). Specified for cleaning parts exposed to contact with amines, polyols or isocyanates.
For application in the following situations:
NOTE: call our technical department about the application to other substrates or scopes of use
| density | 0.87 g/ml |
| purity CG | min. 99.0 % in weight |
| water content ASTM E203 | max. 0.1 % in weight |
| acidity ASTM D1613 | max. 0.01 % in weight |
| color ASTM D5386 | max. 10 Hazen |
| Aaspect | liquid without suspended particules |
Metal containers of two sizes: 25 l. and 5l.
Respiratory Protection: When handling or spraying use an air-purifying respirator. Skin protection: Use rubber gloves, remove immediately after contamination. Wear clean body-covering. Wash thoroughly with soap and water after work and before eating, drinking, or smoking. Eye / Face: Wear safety goggles to prevent splashing and exposure to particles in the air. Waste: Waste generation should be avoided or minimized. Incinerate under controlled conditions in accordance with local laws and national regulations. Re-occupancy of the work site without respiratory equipment is minimum 24 hours providing the correct ventilation for the area sprayed. Contractors and applicators must comply with all applicable and appropriate guidelines for storage and safety guidelines.These safety recommendations for handling, are necessary for the implementation process as well as in the pre and post, on exposure to the loading machinery. Dispose waste in accordance with star or/and local regulations.
