Alcohol-based impregnation, colorless, without yellowing. Specially designed to increase adhesion on non-porous substrates, for use under Desmopol T and Tecnotop S-3000 T. (transparent and aliphatic systems)
For application in the following situations:
NOTE: call our technical department about the application to other substrates or scopes of use
| viscosity | 0.83 g/cm³ |
| density | 20~200 cps |
| flashpoint | 42ºC (107.6ºF) |
| dry time | 10~15 min |
| application method | use a wet rag |
Metallic tins of 4 kg.
12-months shelf life is stored in original containers in a dry environment at a temperature between 5-35 ºC (41-95°F). Keep away from direct sunlight, extreme heat, cold or moisture. Once the tin has been opened, the product must be used.
Respiratory Protection: When handling or spraying use an air-purifying respirator. Skin protection: Use rubber gloves, remove immediately after contamination. Wear clean body-covering. Wash thoroughly with soap and water after work and before eating, drinking, or smoking. Eye / Face: Wear safety goggles to prevent splashing and exposure to particles in the air. Waste: Waste generation should be avoided or minimized. Incinerate under controlled conditions in accordance with local laws and national regulations. Re-occupancy of the work site without respiratory equipment is minimum 24 hours providing the correct ventilation for the area sprayed. Contractors and applicators must comply with all applicable and appropriate guidelines for storage and safety guidelines.These safety recommendations for handling, are necessary for the implementation process as well as in the pre and post, on exposure to the loading machinery. Dispose waste in accordance with star or/and local regulations.
